Autor Thema: BGStar (and Agamatrix) driver on 64bit windows  (Gelesen 16215 mal)

Offline garidan

  • Newbie
  • *
  • Beiträge: 1
  • Country: 00
  • Diabetestyp: DM 3
  • Therapie: Insulin-Pen
BGStar (and Agamatrix) driver on 64bit windows
« am: November 14, 2012, 10:43 »
Sanofi BGSTar, which is made by Agamatrix and rebranded, comes with a software compatible only with 32 windows. If you try to install it on a 64bit Windows, the installation rolls back.
SIDiary for BGStar requires the BGSTar software being installed.
I "discovered" that SIDiary only requires the cable driver, the cable being as usual a USB-RS232 cable using a Silabs chip (link to silabs doc and driver download).
So I downloaded the driver from the link above (click the "tools" tab, file CP210x_VCP_Windows.zip), unzipped and, before running the exe installer, modified the slabvcp.inf file adding the "right" identification strings for the Sanofi cable (which is USB\VID_17F4&PID_AAAA ).
Now on my Windows 7 Ultimate 64 bit I can download BGStar readings too, and merge them with my other glucometer brand and sync them online and with my android SIDiary app: that's good.
I copy here the modified inf file, just replace the original before running the .exe install and say "OK" when windows recognise the driver is no more a valid signed driver (we changed a file, remember): just say you trust it and all is OK.

;/*++
;
;Module Name:
;
;    SLABVCP.INF
;
;    Copyright 2012, Silicon Laboratories
;
;Abstract:
;    Installation INF for Silicon Laboratories CP210x device using KDMF Version 1.9
;
;--*/

[Version]
Signature="$WINDOWS NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%Provider%
DriverVer=10/05/2012,6.6.0.0
CatalogFile=slabvcp.cat


; ================= Device section =====================

[Manufacturer]
%MfgName%=SiLabs, NTamd64

[SiLabs]
%USB\VID_10C4&PID_EA60.DeviceDesc%=silabser.Dev, USB\VID_10C4&PID_EA60
%USB\VID_10C4&PID_EA70&Mi_00.DeviceDesc%=silabser.Dev, USB\VID_10C4&PID_EA70&Mi_00
%USB\VID_10C4&PID_EA70&Mi_01.DeviceDesc%=silabser.Dev, USB\VID_10C4&PID_EA70&Mi_01
%USB\VID_17F4&PID_AAAA.DeviceDesc%=silabser.Dev, USB\VID_17F4&PID_AAAA

[SiLabs.NTamd64]
%USB\VID_10C4&PID_EA60.DeviceDesc%=silabser.Dev, USB\VID_10C4&PID_EA60
%USB\VID_10C4&PID_EA70&Mi_00.DeviceDesc%=silabser.Dev, USB\VID_10C4&PID_EA70&Mi_00
%USB\VID_10C4&PID_EA70&Mi_01.DeviceDesc%=silabser.Dev, USB\VID_10C4&PID_EA70&Mi_01
%USB\VID_17F4&PID_AAAA.DeviceDesc%=silabser.Dev, USB\VID_17F4&PID_AAAA

[silabser.Dev.NT]
Include=msports.inf
AddReg=silabser.AddReg,silabser.NT.AddReg
CopyFiles=silabser.Files.Ext

[silabser.Dev.NT.Services]
Include=msports.inf
Addservice = silabenm,,silabenm.AddService
Addservice = silabser,0x00000002,silabser.AddService

[silabser.AddService]
DisplayName    = %silabser.SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\silabser.sys
LoadOrderGroup = Extended Base

[silabenm.AddService]
DisplayName    = %silabenm.SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\silabenm.sys
LoadOrderGroup = PNP Filter

; common registry entries
[silabser.AddReg]
HKR,,NTMPDriver,,silabser.sys
HKR,,RateLimitPurgeMS, 0x10001, 0x64, 0x00, 0x00, 0x00
HKR,,OverrideDefaultPortSettings, 0x10001, 01,00,00,00
HKR,,InitialBaudRate, 0x10001, 00,C2,01,00      ;115200 initial baud rate
HKR,,InitialLineControl,, "8N1"            ;8-bits, No parity, 1 stop bit

[silabser.NT.AddReg]
HKR,,PortSubClass,1,01
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"

[silabser.Dev.NT.HW]
AddReg=silabser.Dev.NT.HW.AddReg

[silabser.Dev.NT.HW.AddReg]
HKR,,"UpperFilters",0x00010008,"silabenm"
HKR,,"SelectiveSuspendTimeout",0x00010001,10000

[silabser.Files.Ext]
silabser.sys
silabenm.sys

[SourceDisksNames.x86]
1=%Disk_Description%,"silabser.sys",,\x86

[SourceDisksNames.amd64]
1=%Disk_Description%,"silabser.sys",,\x64

[SourceDisksFiles]
silabser.sys = 1
silabenm.sys = 1

[DestinationDirs]
Silabser.Files.Ext = 12

;-------------- WDF Coinstaller installation

[DestinationDirs]
CoInstaller_CopyFiles = 11

[silabser.Dev.NT.CoInstallers]
AddReg=CoInstaller_AddReg
CopyFiles=CoInstaller_CopyFiles

[CoInstaller_CopyFiles]
WdfCoinstaller01009.dll

[SourceDisksFiles]
WdfCoinstaller01009.dll=1

[CoInstaller_AddReg]
HKR,,CoInstallers32,0x00010000, "WdfCoinstaller01009.dll,WdfCoInstaller"

[silabser.Dev.NT.Wdf]
KmdfService = silabser, silabser_wdfsect
[silabser_wdfsect]
KmdfLibraryVersion = 1.9

;---------------------------------------------------------------;

[Strings]
Provider="Silicon Laboratories"
MfgName="Silicon Laboratories"
Disk_Description="Silicon Labs USB to UART Bridge Installation Disk"
USB\VID_10C4&PID_EA60.DeviceDesc="Silicon Labs CP210x USB to UART Bridge"
USB\VID_10C4&PID_EA70&Mi_00.DeviceDesc="Silicon Labs Dual CP210x USB to UART Bridge: Enhanced COM Port"
USB\VID_10C4&PID_EA70&Mi_01.DeviceDesc="Silicon Labs Dual CP210x USB to UART Bridge: Standard COM Port"
USB\VID_17F4&PID_AAAA.DeviceDesc="Silicon Labs CP210x USB to UART Bridge"
silabser.SvcDesc="Silicon Labs CP210x USB to UART Bridge Driver"
silabenm.SvcDesc="Silicon Labs CP210x USB to UART Bridge Serial Port Enumerator Driver"
PortsClassName = "Ports (COM & LPT)"

Offline Joerg Moeller

  • Administrator
  • Special Member
  • *****
  • Beiträge: 16941
  • Country: de
  • Ohana heißt "Familie"...
    • Diabetesinfo
  • Diabetestyp: DM 1
  • Therapie: Insulin-Pumpe
Re: BGStar (and Agamatrix) driver on 64bit windows
« Antwort #1 am: November 15, 2012, 13:05 »
Thank you very much, this works perfectly and we have updated the driver download with your modification: http://www.sinovo.de/download/driver/ZeroClickDriverLinus.zip

Kind regards
Joerg
Meine Seite über Diabetes: http://www.diabetesinfo.de/
Meine Facebook-Seite: https://www.facebook.com/Diabetesinfo.de/